Precautions for using Shanghai Yetuo tissue grinder

Familiar with the operation manual:

Before use, be sure to carefully read the operation manual to understand the basic functions, operating steps, and all precautions of the equipment.

Choose the appropriate grinding medium:

Select appropriate grinding media and containers based on the sample type to ensure compatibility with the sample and avoid chemical reactions or contamination.

Pay attention to the sample size:

According to the specifications and design of the equipment, control the amount of sample to be ground each time to avoid excessive grinding that may cause uneven grinding or damage to the equipment.

Set appropriate parameters:

Set appropriate grinding time and speed based on the characteristics of the sample to avoid prolonged grinding that may cause thermal damage or degradation of the sample.

Monitoring temperature:

Especially for thermosensitive samples, it is recommended to monitor the temperature during the grinding process, using cooling devices or multiple grinding methods in a short period of time to reduce temperature rise.

Regularly inspect equipment:

Before and after each use, check all components of the grinder, including the blade, grinding tank, sealing ring, etc., to ensure that there is no damage and to maintain the equipment in good condition.

Cleaning and disinfection:

After each use, the grinding parts should be cleaned promptly to prevent cross contamination caused by residual samples. Use appropriate cleaning agents and disinfectants, and clean according to equipment requirements.

Avoid direct contact with moving parts:

During the grinding process, avoid direct contact with moving parts to prevent injury. Ensure that the equipment stops when replacing samples or cleaning.

Following the full operational guidelines of AN:

Wear appropriate personal protective equipment such as gloves, masks, and goggles during operation to ensure personal safety.

Pay attention to noise and vibration:

Pay attention to the noise and vibration of the equipment during operation. If any abnormalities are found, immediately stop using and inspect the equipment.

Regular maintenance and upkeep:

Regularly maintain and upkeep the equipment according to the manufacturer's recommendations, including lubrication, component replacement, etc., to ensure the long-term stable operation of the equipment.

Training and technical support:

New users should receive appropriate training, familiarize themselves with equipment operation and maintenance procedures, and contact technical support promptly if they have any questions.

summary

Following these usage precautions can not only ensure the normal operation of the tissue grinder, but also extend the service life of the equipment and improve the reliability and accuracy of experimental results.